Formatting The Smartmedia - Toshiba PDR-M60 Mode D'emploi

Formatting the SmartMedia™

Formatting erases all images currently recorded on the SmartMedia™ loaded on your camera. Protected images
( Page 76) are also erased. SmartMedia™ cannot be formatted if it is write-protected (
IMPORTANT
• The SmartMedia™ must be formatted on the camera before use.
Set the mode dial to [
When [ ] is selected, the last image frame appears on the LCD monitor.
Hold down the
The ERASE menu is displayed.
Use the
Make sure that [FORMAT] is displayed in yellow at the bottom right of
the screen.
Use the
the ENTER button.
To cancel formatting, select [NO], and press the ENTER button.
To reset the image number, use the
select [YES], and press the ENTER button.
To cancel resetting of image numbers, select [NO], and press the
ENTER button.
], [
erase button for two seconds.
buttons to select [FORMAT] 1.
or
buttons to select [YES] 2, and press
or
] or [ ].
or buttons to
- 75 -
Page 32).
ERASE
2 YES
NO
FRAME ALL FORMAT
100
0004
1