Toshiba PDR-M60 Mode D'emploi page 62

Changing the Preset Conditions (REC MENU) (continued)
PREVIEW
This setting allows you to display a photographed image on the LCD monitor for two seconds
immediately after you have taken the shot.
This allows you check the composition and brightness of the photographed image.
To cancel preview, press the shutter button half way down again.
[ON]
[OFF]
ISO
Sets the color mode and photographic sensitivity at which the image is to be recorded.
Flash photography is not possible when the photographic sensitivity is set to [ISO200] [ISO400].
Warning: Noise increases when the ISO is changed to a higher setting.
[ISO100]
[ISO200]
[ISO400]
[B&W]
: Display preview (default)
: Do not display preview
: Equivalent to color ISO100 (default)
: High-sensitive photography equivalent to color ISO200
: High-sensitive photography equivalent to color ISO400
: Black and white
- 60 -