ETNA CM650 Serie Mode D'emploi page 36

BEFORE USE
Installation of the hooks
1
a
2
b
3
Installation of the racks
EN 10
Install the hooks with 'R' at the rear holes of the cavity.
Install the hook with 'F' at the front holes of the cavity.
Please remove the tape on the side of the cavity before the
installation of the hooks.
1. First, install the hook into hole 'a'.
2. Then, push the hook into hole 'b'.
3. Finally, push the hook down into the right place.
Note the difference between the left and right rack.
The left rack.
The right rack.