Wash new sponges thoroughly before first use.
Wipe the appliance with plenty of water and
Stainless steel
some washing-up liquid. Always wipe parallel
fronts
to the natural grain. Otherwise, you may
scratch the surface. Dry with a soft cloth.
Remove flecks of limescale, grease, starch
and albumin (e.g. egg white) immediately. Do
not use any abrasive materials, scouring
sponges or rough cleaning cloths. The stain-
less steel fronts can be polished using a spe-
cial care product. Follow the manufacturer's
instructions. You can purchase special stain-
less steel cleaner from our after-sales service
or from specialist retailers.
Wipe the appliance with some washing-up liq-
Enamel
uid and warm water. Dry with a soft cloth.
surfaces and
lacquered
surfaces
Wipe the appliance with some washing-up liq-
Knobs
uid and warm water. Dry with a soft cloth.
Can be cleaned with glass cleaner. Do not
Glass panel
use any abrasive cleaning agents or sharp
metal objects. These could scratch and dam-
age the surface of the glass panel.
Wipe with a damp cloth. Dry with a soft cloth.
Seal
Clean with hot water or vinegar solution. For
Inside the
heavy soiling: Only use oven cleaner on cold
oven
surfaces.
Wipe the appliance with some washing-up liq-
Glass cover on
uid and warm water. Dry with a soft cloth.
the oven light
Soak in hot soapy water. Clean with a brush
Accessories
or a sponge.
Do not clean in the dishwasher. Never use
Aluminium
oven cleaner. To avoid scratches, never touch
baking tray
the metal surfaces with a knife or similar
(option)
sharp object. Clean horizontally with some
washing-up liquid and a damp glass cleaning
cloth or a microfibre cloth. Dry with a soft
cloth. Do not use any abrasive materials,
scouring sponges or rough cleaning cloths.
They could scratch the baking tray
If a childproof lock has been fitted on the
Childproof
oven door, it must be removed before clean-
lock (option)
ing. Soak all plastic parts in hot soapy water
and wash with a sponge. Dry with a soft cloth.
If very dirty, the childproof lock will not work
properly.
Information on care and cleaning can be
Hob
found in the instruction manual for your hob.
Detaching and refitting the rails
The rails can be removed for cleaning. The oven must have
cooled down.
Unhooking the rails
Hold the shelf frames from underneath and pull slightly
1.
forward. Pull the extension pins at the bottom of the rails out
of the mounting holes (Fig. A).
Then fold the rails upwards and carefully remove them
2.
(Fig. B).
Clean the rails with washing-up liquid and a sponge. For
stubborn deposits of dirt, use a brush.
Installing the frames
Insert the two hooks carefully into the upper holes. (Fig. A-B)
1.
:
Incorrect assembly!
Never move the frame before the two hooks are fully
anchored in the upper holes. The enamel could be damaged
and may break (Fig. C).
the two hooks must be inserted fully into the upper holes.
2.
Now move the frame slowly and carefully downwards and
insert in the lower holes (Fig. D).
Insert both frames into the side walls of the oven (Fig. E).
3.
If the rails are fitted correctly, the distance between the two
upper shelf positions is greater.
47