Télécharger Imprimer la page

Junker JB23UB 0 Serie Notice D'utilisation page 46

Publicité

Les langues disponibles

Les langues disponibles

Setting the time
Following a power cut or when the oven is used for the first
time, the
symbol and three zeros flash in the display. Set the
0
time. The function selector must be switched off.
Setting procedure
Press the
clock button.
0
1.
12.00 appears and the
Use the + and - buttons to set the time.
2.
After a few seconds, the time is accepted. The
goes out.
Setting the timer
You can use the timer as a normal kitchen timer. It operates
independently of the oven. The timer has a specific signal. This
informs you when the timer or cooking time has elapsed. You
can also set the timer if the childproof lock is active.
Setting procedure
Press the
S
timer button.
1.
The
S
symbol flashes.
Use the + or - buttons to set the timer time.
2.
Default value for button + = 10 minutes
Default value for button - = 5 minutes
The timer starts after a few seconds. The
display. The time counts down in the display.
The time has elapsed
A signal sounds. Press the
goes out.
Childproof lock
Oven
To ensure that the oven cannot be switched on by children
when playing, a childproof lock is incorporated in the
appliance.
Switching the childproof lock on and off
The function selector must be switched off.
Press the
key button repeatedly until the
C
appears in the display. This procedure takes approx.
4 seconds.
Deactivating: Press the
C
symbol goes out.
Care and cleaning
With good care and cleaning, your oven will remain clean and
fully-functioning for a long time to come. Here we will explain
how to maintain and clean your oven correctly.
Notes
Slight differences in the colours on the front of the oven are
caused by the use of different materials, such as glass,
plastic and metal.
Shadows on the door panel which look like streaks, are
caused by reflections made by the oven light.
Enamel is baked on at very high temperatures. This can
cause some slight colour variations. This is normal and does
not affect their function. The edges of thin trays cannot be
completely enamelled. As a result, these edges can be
rough. This will not impair the anti-corrosion protection.
46
symbol flashes.
0
0
symbol is lit in the
S
S
timer button. The timer display
symbol
C
key button repeatedly until the
Changing from summer to winter time.
Press the
0
change the time.
symbol
Changing the alarm time
Press the
S
time.
Delete the setting
Press the
S
in the display.
The timer and the cooking time run down in synchronisation
The symbols are lit. The timer time counts down in the display.
Check the remaining
of day:
Press the
0
is displayed.
The requested value appears in the display for several
seconds.
Notes
You can set the timer and clock at any time.
If the childproof lock is active, it will be cancelled following a
power cut.
C
Cleaning agents
Damage to the various different surfaces caused by using the
wrong cleaning agent can be avoided by observing the
following instructions.
When cleaning the oven do not use
sharp or abrasive cleaning agents,
cleaning agent with a high alcohol content,
scouring pads,
high-pressure cleaners or steam jets.
Do not clean individual parts in the dishwasher.
clock button twice and use the + or - buttons to
timer button. Use the + or - buttons to change the
timer button. Press the - button until zeros appear
cooking time,
x
clock button repeatedly until the relevant symbol
end time or
time
y
0

Publicité

loading