Télécharger Imprimer la page

Atag WS90BAM Serie Notice D'utilisation page 77

Publicité

Les langues disponibles

Les langues disponibles

MAINTENANCE
B
1
1
C
2
C
B
Lighting
Active carbon filters:
The regenerable active carbon filter must be washed by hand with
neutral cleaning products, or in the dishwasher at a maximum
temperature of 65 °C (the washing should be done without any plates,
dishes, cups, etc. in the machine).
Remove the excess water without damaging the filter, remove the
holder and let the filter dry in the oven for at least 15 minutes at a
maximum temperature of 100 °C.
To keep the regenerable carbon filter efficient, this action should be
repeated every 2 months or when indicated by the filter indicator.
The filter must be replaced after no more than 3 years, or if it has
been damaged.
It is important that the grease filters and the regenerable active
carbon filter are thoroughly dry before repositioning.
Replacing the carbon filter:
The grease filters should first be removed before replacing the
carbon filter.
Press the two 'B' buttons on the carbon filter inwards.
• Tilt the carbon filter downwards to remove it.
Repeat the steps above in reverse order, to replace the carbon filter.
Operation:
Using a carbon filter creates more sound than when using the
cooker hood with an outlet.
• The carbon filter's operation is optimal at a lower motor speed.
You should, therefore, avoid using the boost function.
This hood is fitted with a light system. This light system has to be
replaced by an authorized technician. Do not attempt to replace it
by yourself.
The lamp in this household appliance is only suitable for
illumination of this appliance. The lamp is not suitable for
household room illumination.
EN 11

Publicité

loading

Ce manuel est également adapté pour:

Ws10ram serieWs90sam serieWs12sam serieWs15sam serie