Publicité
Les langues disponibles
Les langues disponibles
10. Log functionality
10�1 Logging
Each heating mode has a slider on the screen with which the log functionality of the heater
"LOG" can be activated or deactivated. This functionality offers the possibility of defining
certain parameters for the heating process, such as temperature, time, power, operator and
workpiece data.
NOTE!
In order to be able to log and export these data, an empty USB data carrier
(not supplied) must be plugged in to the USB port provided at the side of
the device.
If this functionality is activated, a menu appears each time the "START" button is pressed in
which data has to be entered. Only then can heating actually be started.
Pressing "START"
Tap the item to be changed/entered. A keypad is displayed.
36
displays the following screen:
© Bessey Tools
Publicité
