Publicité
Les langues disponibles
Les langues disponibles
• While the machine is starting up, a logo is displayed on the screen.
Starting up takes some time.
• Connect the temperature sensor by inserting the plug into the socket. Make sure that the
– and + of the plug correspond to that of the socket.
• The induction heater is now ready for use.
5. Explanation of display, buttons and connections
14
- Touchscreen:
time or temperature
heating mode
settings
information
red temperature = T1
green temperature = T2
- Start /Stop button heating /
automatic demagnetisation
Sensor connections T1 and T2.
T1 (red on display) is the main temperature that
controls the heating process.
T2 (green on display) is an additional measurement
that can be used to monitor and adjust a
temperature difference, ΔT, in a workpiece during
heating.
USB port for logging purposes (stored heating data).
© Bessey Tools
Publicité
