Publicité
Les langues disponibles
Les langues disponibles
OPERATING THE APPLIANCE
Switch on the intensive cooling function
1. Push (several times) the function button to choose setting 'max'.
The corresponding indicator light comes on.
2. Then push and hold the function button for 5 seconds.
All the indicator lights come on; the intensive cooling function is switched on.
Switch off the intensive cooling function
1. Push and hold the function button for 5 seconds.
The indicator light of setting 'max' stays on, all other indicator lights go off; the intensive
cooling function is switched off.
When the intensive cooling function is not switched off manually, the function will be
switched off automatically after about 5 hours.
Switching off the appliance
1. Push (several times) the function button to choose setting 'min'.
The corresponding indicator light comes on.
2. Then push and hold the On/Off button for 5 seconds.
All lights flash three times and the lighting goes off; the appliance is now switched off
(standby).
If the On/Off button is pushed again or pushed too short, all lights will flash three times to
indicate that the appliance is in standby.
Open door alarm
If the door is left open for more than 2 minutes, the interior light will flash.
EN 17
Publicité
