Breville the HydroPro Plus CSV750 Mode D'emploi page 12

NOTE
When using the probe holder, this can be
attached directly onto the clamp by following
the directions below (available for the CSV750
model only).
5. Plug the power cord into a properly
grounded electrical outlet.
The TFT screen will light and the Welcome
screen will come up.
The Welcome screen will enable you to
configure your settings, as per:
- Language
- Time (available for CSV750 only)
- Date (available for CSV750 only)
- Temperature Units
- Measurement Units
- Data Logging Set Up – for HACCP Cooking
log (setting available for the CSV750 model
only).
You are now ready to begin cooking with your
immersion circulator!
12