Operation - Goobay 45801 Mode D'emploi

H (m)
4 m
3 m
2 m
1 m
1 m2 m 3 m4 m 5 m6 m 7 m
6

Operation

The range can not be adjusted.
It can be varied due to the mounting height.
The switch-off delay can not be set.
The trigger sensitivity can not be adjusted.
The multifunction switch can switch 3 modes.
• Press the multifunction switch once each time to switch to the next
mode.
Models 45801-45803:
Mode A:
A
10 s
100 % 20 % 20 %
A
5 h
20 % 20 %
R (m)
A B
The front and rear lights illuminate at full
power after a movement in the detection
area and change to approximately 20 %
power after approximately 10 seconds
without movement until a new movement
detection.
Front and rear light automatically switch
on at 20 % of the maximum power for about
5 hours at dusk or an ambient brightness
of ≤30 lx without motion detection, then
down again.
Fig. 5: Installation - Reach
C (D)
Fig. 6: Operation - Function modes
16