Télécharger Imprimer la page

Candy Brava CDSN 2D520PX Mode D'emploi page 97

Publicité

Les langues disponibles

Les langues disponibles

15. PROGRAMME SELECTION
AND SPECIAL FEATURES
ON/OFF button
l
To turn the appliance on and off, press
the ON/OFF button (for at least 3
seconds).
At the end of the cycle, remember to
switch off the appliance using the
ON/OFF button, then remove the plug
and close the water supply.
First time you switch on the
appliance
l
Connect the machine to the power
supply.
l
Open the door, put the dishes to be
washed inside, and close the door again.
l
Press the "ON/OFF" button and hold for
about 3 seconds.
l
In this phase only the "SMART DOOR/
EXPRESS" "TABS" and "Start/ Reset"
buttons will remain active. The message
"BRAVA" will appear on the display and
all the indicator lights will turn on for 3
secs.
l
The message "ENGLISH" will appear on
the display.
l
Pressing the "SMART DOOR/EXPRESS"
and "TABS" buttons you can select the
preferred language.
l
To accept the language selection press
the "Start/Reset" button Immediately
afterwards the "WELCOME" message
will scroll on the display once and the
indicator lights will all be off.
l
The message of the "ECO 2:50" or "ECO
3:25" programme (with SMART DOOR
option activated).
 
WARNING
In the event that the machine remains
switched
on
starting any program, after 5 mins. the
dishwasher will switch off automatically.
Next time you switch on the
appliance
Hold down the ON/OFF button for about 3
secs to turn the machine on and the "ECO
2:50" programme or the programme you
have decided to use will appear on the
display, saving it when the dishwasher is
switched on. (To save the programme, see
the specific paragraph "Memorising the
last programme used").
Settings Menu
The dishwasher is regulated with certain
factory settings. Nevertheless, from the
Settings menu, you can adjust various
parameters to suit your washing requirements.
Entering the Settings menu
The dishwasher must ALWAYS be off
before you start this procedure.
l
Turn on the dishwasher by holding the
"ON/OFF" button down for about 3 secs.
l
Hold down the "Progr." and "ON/OFF"
buttons for about 5 secs.
l
The message "SETTINGS" will appear
on the display and the indicator lights of
the "SMART DOOR/EXPRESS" and
"TABS" buttons will be on.
l
Pressing the "Progr." button you can
select the parameters to be adjusted in
succession (SOFTENER → BUZZER →
MEMO FUNCTION).
l
Parameter adjustment is performed by
pressing the "SMART DOOR/EXPRESS"
(-) and "TABS" (+) buttons.
97
without
selecting
or

Publicité

loading