Publicité
Les langues disponibles
Les langues disponibles
Notes
The cooking compartment remains cold during microwave
■
operation. The cooling fan will still switch on. The fan may run
on even when microwave operation has ended.
Condensation may appear on the door window, interior walls
■
and floor. This is normal and does not adversely affect
Memory
You can save the settings for a dish in the memory and call it
up again at any time.
The memory is useful for if you frequently prepare a specific
dish.
Saving memory settings
Example: 360 W, 25 minutes
Press the "
" button.
i
1.
The indicator lamp lights up.
Press the required microwave power setting.
2.
The selected power setting lights up and "1:00 min" appears.
Set the cooking time using the rotary selector.
3.
Confirm by pressing the "
4.
The clock reappears. The setting is saved.
Note: You can savve the memory settings nd start the
appliance immediately. When finishing, instead of pressing the
"
" button, press Start.
i
Changing the signal duration
You will hear a signal when the appliance is switched off. You
can change the duration of the acoustic signal.
Press the Start button for approx. 6 seconds.
Care and cleaning
With careful care and cleaning your microwave oven will retain
its looks and remain good order. We will explain here how you
should care for and clean your appliance correctly.
:
Risk of short circuit!
Never use high-pressure cleaners or steam cleaners to clean
the oven.
20
" button.
i
microwave operation. Wipe away the condensation after
cooking.
Adding to the memory
Press the "
" button.
i
The old settings appear. Save the new programme as
described in points 1 to 4.
Notes
You cannot save several microwave power settings one after
■
the other.
You cannot save automatic programmes.
■
Starting the memory
It is very easy to start the saved programme. Place your meal
into the appliance. Close the appliance door.
Press the "
i
" button.
1.
The saved settings are displayed.
Press the Start button.
2.
The cooking time counts down in the display.
The cooking time has elapsed
A signal sounds. Open the appliance door or press Stop. The
clock reappears.
Pausing
Press the Stop button once or open the appliance door.
Operation is suspended. The display above Start flashes. After
closing the door, press the Start button again.
Cancelling the setting
Press the Stop button twice, or open the appliance door and
press the Stop button once.
The new signal duration is adopted.
The clock reappears.
The following are possible:
Short signal duration - 3 tones
Long signal duration - 30 tones.
:
Risk of burns!
Never clean the appliance immediately after switching off. Let
the appliance cool down.
:
Risk of electric shock!
Do not immerse the appliance in water or clean under a jet of
water.
Publicité
