Heiniger Saphir CORD Notice D'utilisation page 47

• Oil the blades before, during and after every use.
• Oil the blades at the latest when the blades leave streaks or
slow down.
• Apply several drops of oil on the front and on the sides of the
clipping blades (see Fig. 10).
• Wipe excess oil off with a soft, dry cloth.
• Lubricating sprays do not contain enough oil for good
lubrication but are however suitable for cooling the clipping
blades.
• Immediately replace damaged or notched blades in order to
avoid injuries.
6.6 Cleaning
Clipping head and hinge area
Between uses, clean the clipping head and the hinge area
‹
with the brush.
Contacts
Clean the contacts of the mains operation adapter and the
‹
clipper with a dry cloth.
Professional Animal Clipper 47