Heiniger Saphir CORD Notice D'utilisation page 35

Mortal danger from electrical current!
Mortal danger can result from contact with current-carrying
conductors or components!
► Only permit repairs to the clipper to be made by authorised
dealers or the factory customer service department; this
applies especially to replacement of a damaged power
cord.
► Before plugging the clipper in, compare the electrical
connection data (voltage and frequency) on the nameplate
with that of your electric mains. These data must be
identical so that no damage occurs to the device. When in
doubt, ask your specialised electrical dealer.
► Do not, under any circumstances, open the housing of the
clipper. If voltage-bearing connectors are disturbed or the
electrical and mechanical construction is modified, there is
risk of electric shock.
► Keep moisture away from the clipper. It can lead to short
circuits. If you suspect that moisture has penetrated the
device, do not switch it on again and take it to a repair
shop.
► Never clip wet animals.
► Only clean the clipper when dry, using a brush or the
enclosed cleaning brush.
► Never submerge the clipper in water or other liquids.
► Always remove the plug from its the socket before working
on the clipper.
Professional Animal Clipper
DANGER
35