Heiniger Saphir CORD Notice D'utilisation page 45

6.4 Changing the clipping head
Fig. 8
Fig. 9
Clean the opened hinge area with the supplied brush.
‹
Mount the new or sharpened clipping head as described in
‹
Section 6.2.
► Work only with sharp clipping blades and replace dull
blades and blades with missing teeth. Proper sharpening
of clipping blades is only possible by an expert using
specialised equipment. When faced with the need to
sharpen the blades, contact your service centre.
Professional Animal Clipper
Turn the clipper off by
‹
pushing the on/off switch
to position "0".
Press and hold the
‹
clipping head release
button.
Tilt the released clipping
‹
head forwards.
Pull the clipping head
‹
off.
NOTE
45