Servicing - Heiniger Saphir CORD Notice D'utilisation

6 Servicing

6.1 Requirements at the job site
• Observe the operating requirements (see section on Technical
Data).
• Outdoor electrical sockets must be fitted with a residual current
device.
• The work place must have adequate lighting.
• The electrical socket must be easily accessible so that the
device can be quickly disconnected from the mains.
6.2 Installing the clipping head
1
Fig. 4
42
Push the on/off switch of the
‹
clipper to position "0".
2
Insert the electrical power
‹
plug into the mains socket.
Tilt the blade hinge (2) up
‹
with the aid of a screwdriver
(1).
Professional Animal Clipper