Fujitsu STYLISTIC M532 Guide D'utilisation page 59

Problem
The tablet does not start after
powering on
The tablet stops working
The radio connection to a net-
work does not work
The battery discharges too
quickly
Acoustic warnings
Possible Cause
The power adapter is not
connected correctly.
The tablet is in energy saving
mode.
An application has caused the
malfunction.
The battery is dead.
The tablet does not respond to
inputs.
The wireless component is
disabled.
The wireless component is
enabled. Despite this, the
wireless connection to a network
does not work.
You may have an application
running that consumes a great
deal of power due to frequent
accessing of radio, GPS or network
connections.
The maximum brightness may
have been set for the screen.
A beep sounds every few
seconds., indicating the battery is
almost empty.
Possible Solutions
Check whether the AC adapter is connected correctly to the
•
tablet.
Switch on the tablet.
•
Leave the energy saving mode: Press the ON/OFF switch.
Close the application program or restart the tablet (by restarting
the operating system or switching the device off and back on
again).
Charge the battery, or, connect the AC adapter to the Tablet.
Restart the tablet manually (see "Using the Reset Button" on
page 56).
Switch the radio component on.
Check that the wireless connection is correctly set up via
the Settings .
Use the AC adapter as frequently as possible.
•
Close unnecessary applications, reduce the frequency of the
•
access to radio components or the network or switch off the
radio components in a targeted way via the settings.
Reduce the brightness of the screen to lower energy consump-
tion: you will find the adjustment under
Brightness
.
Charge the battery.
58 - Troubleshooting
Settings > Display >