Fujitsu STYLISTIC M532 Guide D'utilisation page 28

If connected, remove the AC adapter cable from the DC In connector on the rear of the cradle base (Figure 16).
2
Position the tablet so that the docking connector on the bottom of the unit is aligned with the docking
3
connector on the cradle base (Figure 15).
Push the tablet onto the cradle in the direction of the arrow until it engages with the plug.
4
Plug the AC adapter into the DC In connector on the rear of the cradle.
5
Plug the AC adapter cable into an AC socket.
6
Docking
Connector
Figure 15. Connecting the tablet to the cradle Figure 16. Powering the tablet with the cradle
27 - Using the optional cradle
AC Adapter
DC In