Fujitsu STYLISTIC M532 Guide D'utilisation page 27

Assembling the Cradle
The cradle consists of two pieces: The cradle base and the cradle easel.
To assemble the cradle, simply slide the narrow end of the base into the slot in the easel until the notches in the
bottom of the base are aligned above the alignment point. Rest the base on the easel.
Alignment Point
Alignment Point
Connecting the Tablet to the Cradle
I
•
F YOU CONNECT THE TABLET TO THE
TABLET BEFOREHAND
I
•
F THE TABLET IS CONNECTED TO THE
THE TABLET
Switch off the tablet.
1
Figure 14. Assembling the Cradle
C
RADLE DURING OPERATION
.
C
RADLE
.
26 - Using the optional cradle
Cradle Easel
,
PROBLEMS CAN OCCUR
, AC
YOU MUST CONNECT THE ADAPTER TO THE
Cradle Base
. W
E RECOMMEND THAT YOU SWITCH OFF THE
C
RADLE IN ORDER TO CHARGE OR POWER