Publicité
Les langues disponibles
Les langues disponibles
DOOR REVERSE
The side at which the door opens can be changed, from the left
side (as supplied) to the right side, if the installation site
requires.
Warning! When reversing the door, the appliance must not be
connected to the mains. Ensure that the plug is removed from
the mains socket.
Note: Before you start lay the appliance on its back in order to
gain access to the base, you should rest it on soft foam
packaging or similar material to avoid damaging the backboard.
Stand the appliance upright. Open the door to take out all door
racks (to avoid racks damaged)and then close the door.
To reverse the door, the following steps are generally
recommended:
1.Screw off the four bolts which in top
left with cross opener and take off the
cover.
2. Screw off the one bolt which in right
hinge cover with cross opener and take
it off.
3. Disconnect the light switch(1) and
take it off.
4. Use a screwdriver to remove the right
upper hinge.
-55-
1
Publicité
