Publicité
Les langues disponibles
Les langues disponibles
Round Bar Set Up Locations
(Standard Coupler)
Approximate desired
working range on a 6" tall
frame.
12"-13"
Figure 7
Round Bar Set up Locations
(Bottom Mounted Coupler)
Approximate desired
working range on a 6" tall
frame.
12"-13"
Figure 7A
If you have a bottom mounted coupler it may be necessary to tilt the ball mount as far forward towards the
front of the tow vehicle as possible.
The Measurements in figures 6, 6A, 7 & 7A are guidelines, adjustment of the cam arm length via the adjustment nut (Figure 5)
may be required after hookup in later instructions of this manual Cequent Performance Products, Inc. is not responsible for
damage incurred due to disregarding any part of this manual.
©
2014 Cequent Performance Products, Inc.
Installation Instructions
REESE Dual Cam HP
High-Performance Sway Control
CAUTION:
Sheet 4 of 33
18"
19-1/8"
FROM MARK ON COUPLER
ALONG SIDE OF FRAME
26002IN
10/1/15
Rev. S
Publicité
