3
Installing the Guard
Parts needed for this procedure:
1
Guard
–
Screwdriver (not included)
Procedure
1.
Using a Phillips head screwdriver, remove the 2 screws, 2 washers, and 2 spacers from the trimmer
base (A of
Figure
2.
Align the guard onto the trimmer base (B of
3.
Secure the guard onto the base of the trimmer with the 2 screws, 2 washers, and 2 spacers previously
removed (C of
Figure
All manuals and user guides at all-guides.com
5).
4).
Figure
5).
Figure 5
10
g330190