Toro Flex-Force Power System 13in 60V MAX Mode D'emploi page 11

2
Installing the Auxiliary Handle
Parts needed for this procedure:
1 Auxiliary handle assembly
–
Screwdriver (not included)
Procedure
1. Using a Phillips head screwdriver, separate the auxiliary handle from the handle plate by removing
the 2 screws (A of
2. Line up the auxiliary handle with auxiliary handle plate on the trimmer handle (B of
3. Secure the auxiliary handle to the handle plate with the 2 previously removed screws (C of
All manuals and user guides at all-guides.com
Figure 4).
Figure 4
9
Figure 4).
Figure 4).
g331072