Publicité
Les langues disponibles
Les langues disponibles
EN
•
Monitor the situation of the equipment and the structure continuously while using the equipment.
•
Parts of an object that could fly off must be secured.
•
Use only genuine Holmatro accessories and ensure that they have been attached correctly.
•
Make sure that parts of the body never come between moving parts. There is a risk that parts of the
body may be crushed or cut.
•
Make sure that the deadman's handle does not become jammed.
•
Stop immediately if the system makes strange noises or displays aberrant behaviour.
•
Stop immediately if the equipment leaks oil. Oil escaping under pressure can penetrate the skin and
cause serious injury. Go immediately to a hospital with a person who is injected with oil for medical
help. Give a specification of the oil to the medical staff.
•
Return inactive equipment immediately to the tool station.
•
Always adhere to the safety regulations that apply to other equipment that is used in the operation.
2.11
Safety regulations with respect to maintenance
•
Wear personal means of protection when performing maintenance tasks.
•
Never work in a way that could jeopardize safety.
•
Make sure that the equipment cannot roll away or tip over. The control and drive must be switched
off and safeguarded against unexpected activation.
•
Make sure that moving parts do not move unexpectedly.
•
Used or leaked fluids, and any other products consumed during the activities, must be collected and
disposed of in an environmentally responsible way.
3
Description
3.1
Equipment
The spreader can be used independently because of the battery-driven hydraulic system.
The tool is produced as a hand tool that can be operated by one person.
The tool is suitable for spreading, cutting, squeezing or pulling apart structural elements of vehicles
during rescue operations. It can squeeze material tightly or squash it and thus create weak pivots or
places that are easier to cut. It can also force pieces apart by means of the two spreading tips on the
front of the tool. By placing accessories on the points, materials can be pulled together.
3.2
Type designation
Example: GSP 5240 CL EVO 3
/i
Digit
Example
1-3
GSP
4-7
5240
8-9
CL
10-13
EVO 3
3.3
Product identification
See Fig. 2.
36
Description
G = Greenline
SP = Spreader
Type indication
Compact Light
EVO 3 series
916.001.653_003
GSP 52* EVO 3
Publicité
