Qlima WDH 235 PTC Manuel D'utilisation page 122

SMART SCENES
Smart Scenes is a powerful tool providing the option to customise the operation of the air
conditioner based both on conditions within the room and outside influences. This gives
the user the option of specifying much more intelligent actions. These are split into two
catagories Scene and Automation.
SCENE
Scene allows for a one touch button to be added to the Home screen. The button can be
used to change a number of settings in one go, and can change all the settings within the
unit. A number of scenes can easily be setup, allowing the user to easily change between a
number of preset configurations.
Below is an example of how to set up a scene:
1. Press on the Smart Scene tab
at the bottom of the Home
screen
6. Once all the functions required have been added, press the Save button in the top right corner
to finalise and save your new Scene
4
122
2. Press on the Plus in the
topright corner to add a
smartscene.
4. Press the Pen next to"Please
Enter Scene Name" to input
the name for your Scene
Show on Dashboard: Leave
this on if you require the
scene to be displayed as a
button on the Home Screen
Press the Red Plus to add the
action required. Then select
the air conditioner from the
list of devices.
3. Select Scene to create a new
Scene
5. Chose the function, set the
value for the function, and
then press the back button
in the top right corner, to
return to the previous
screen.