Publicité
Les langues disponibles
Les langues disponibles
Anytime during a cycle, press
CANCEL/DRAIN
glows. The dishwasher starts a 2-minute drain (if
needed). Let the dishwasher drain completely. The light goes off
when the dishwasher finishes the drain.
To stop the drain
You can press Cancel/Drain again to stop the drain immediately.
Remember to drain the dishwasher
before starting a new cycle.
To clear the indicators
Press Cancel/Drain before starting the dishwasher to clear all
options and cycles.
During the first minute of a cycle
1. Press a new cycle and/or options.
2. Check the detergent dispensers. They must be filled properly
for the new cycle.
After the first minute of a cycle
1. Press
CANCEL/DRAIN
glows. Your dishwasher starts a 2-minute
drain (if needed). Let the dishwasher drain completely.
2. Check the detergent dispensers. They must be filled properly
for the new cycle.
3. Close the door.
4.
Press a new cycle and/or options.
5.
Press START.
, s
_
,.......
]_,
_,J, +<_,,,,#;s
You can add an item anytime before the main wash starts. Open
the door and check the detergent dispenser. If the cover is still
closed, you can add items.
To add items
1. Lift up the door latch to stop the cycle. Wait for the spraying
action to stop before opening the door.
2. Open the door. If the detergent dispenser cover is still closed,
add the item.
3. Cl°se the d°°r firmly until it latches" The dishwasher resumes
the cycle after about a 5-second pause.
You can customize your cycles by pressing an option. If you
change your mind, press the option again to turn the option off.
Select a different option if desired.
You can change an option anytime before the selected option
begins. For example, you can press an unheated drying option
any time before drying begins.
Press START to use the same cycle and option(s) as the previous
wash cycle.
NOTE: If the last cycle you completed was a rinse cycle, when
you press Start, the dishwasher
runs the last full wash cycle and
options.
Hi Temp Scrub
Select this option to heat the water during parts of the cycle. Hi
Temp Scrub heats the water to 145°F (63°C) in the main wash.
Heating the water helps improve washing results. Hi Temp Scrub
is useful when loads contain baked-on food.
This option adds heat, water and wash time to the cycle.
NOTE: Hi Temp Scrub is an option with Pots Pans and Normal
Wash.
Sani Rinse
Select this option to raise the water temperature
in the final rinse
to approximately
155°F (68°C). Sani Rinse adds heat and time to
the cycle. The high-temperature
rinse sanitizes your dishes and
glassware in accordance with the NSF/ANSI Standard 184 for
Residential Dishwashers. Certified residential dishwashers
are
not intended for licensed food establishments.
NOTE: Sani Rinse is an option with Pots Pans and Normal Wash
cycles. Only these sanitization cycles have been designed to
meet the NSF/ANSI requirements.
Air Dry
Select this energy-saving
option to dry without heat. Air drying is
useful when loads contain plastic dinnerware that may be
sensitive to high temperatures.
LOCKON
The dishes take longer to dry and some spotting can occur. For
best drying, use a liquid rinse aid. Some items (such as plastics)
may need towel drying.
NOTE: Time Saver and Quick Rinse automatically use this
option. Air Dry is an option with all other cycles.
14
Publicité
