ResMed AirSense 11 Mode D'emploi page 9

To set up the device:
1. Place the device on a stable level surface.
2. Connect the pow er cord into the pow er inlet at the rear of the device. Connect one end of the pow er
cord into the AC adaptor and the other end into the pow er outlet. Ensure the device is set up and
connected to pow er to enable settings to be applied w irelessly to the device if required.
3. Connect the air tubing firmly to the outlet connector at the rear of the device.
4. Open the humidifier tub and fill it w ith distilled w ater up to the maximum w ater level mark. The
humidifier tub must be rem oved from the device before adding w ater. The humidifier tub has a
maximum capacity of 380 mL.
5. Close the humidifier tub and insert it into the side of the device.
6. Connect the free end of the air tubing firmly onto the assembled mask.