ResMed AirSense 11 Mode D'emploi page 25

Standard humidifier tub - Material:
65W power supply unit
ACinput range
DCoutput
Typical power consumption
P eak power consumption
C lass of equipment
Environmental conditions
O perating temperature
O perating humidity
O perating altitude
Storage pressure/Storage altitude
Storage and transport temperature
Storage and transport humidity
Air Filter
Standard:
Hypoallergenic:
Injection molded plastic, stainless steel and silicone seal
100-240v, 50-60Hz, 2.0A
115V, 400Hz, 1.5A (for aircraft use)
24 VDC± 1 VDC , 2.71A
56.1W (111.5VA)
73.2W (137.6VA)
C lass ll
+41°Fto +95°F(+5°Cto +35°C )
Note: The airflow for breathingproducedby this therapy device can be
higher than the roomtemperature. Under extreme ambient temperature
conditions (104°F /40°C ) the deviceremains safe.
10 to 95% relative humidity, non-condensing
Sea level to 9,870' (3,010 m); air pressurerange 1060 hP ato 700 hP a
1060 to 700 hP a relative humidity, non-condensing
-13°Fto +158°F(-25°Cto+70°C )
5 to 95% relative humidity, non-condensing
Material: P olyester nonwoven fiber
Average arrestance: >75%, when testedto E N779.
Material: Blended synthetic fibers in a polypropylene carrier
E fficiency: >80% (average) when testedto E N13274-7.
Note: The use of a ResMed approved hypoallergenicfilter will result in a