ResMed AirSense 11 Mode D'emploi page 27

*Bands may not be available in all regions.
FCCID: 2ACHL-AIR114G
IC: 9103A-AIR114G
The AirSense 11device complies with F C CRules andIndustryC anadarules. O peration is subject to the following two conditions:
1. This device may not cause harmful interference; and
2. This device must accept any interference received, including interferencethat may cause undesired operation.
The AirSense 11device should beinstalledand operated with minimumdistance of 0.59" (15 mm) between the equipment andthe
user's body.
Additional information regardingthe F C CR ules and ICcompliance for this device canbe found on R esMed.com/downloads/devices
In C anada, the device hasbeen designed to comply with safety standards to radio waves (SAR) in accordanceto R SS-102.
Humidifier
Maximumheater platetemperature:
Temperature cut-out (heater):
Maximumgas temperature (at mask)
1
The air flow for breathing produced by thistherapydevice can be higher than thetemperature of theroom. Under extreme
ambient temperature conditions (104ºF /40ºC) the device remains safe.
Humidifier performance
SlimLine/Standard tubing
Mask Pressure Nominal % RH
cm H O(hPa) when delivered to
2
mask at 72ºF(22ºC)
Setting 4 (default
setting)
4 80%
154ºF(68ºC )
165ºF(74ºC )
1
: ≤ 106ºF(41ºC )
Nominal % RH delivered
to mask, tested at 72ºF
(22ºC) ambient
Setting 8 (maximum
setting)
100%
Nominal system output mg/L AH
Setting 4 (default Setting 8
setting) setting)
≥6 >12
1 2
, BTPS
3 (maximum