Candy RP4 H7A2TRE-S Mode D'emploi page 61

To clean the condenser filter
1. Remove the kickplate.
2. Turn the locking levers anti-clockwise
and pull out the front cover.
3. Gently remove the filter frame and clean
any dust or fluff with a cloth from the
filter. Do not use water to clean the filter.
4. Remove the sponge gently from its place
and then wash the sponge by holding it
under a running tap turning it so to remove
any dust or fluff.
5. Refit the front cover ensuring it is in the
correct way (as indicated by the arrow)
and pushed firmly into place. Lock the
levers by turning them clockwise.
6. Refit the kickplate.
61