Viking CVMOC206 Manuel D'utilisation Et D'entretien page 35

otHer convenient featureS
multiple Sequence cooKinG
The oven can be programmed for up to 4 automatic cooking sequences for
the microwave mode and 2 automatic cooking sequences with preheat for
convection/mix mode, switching from one power level setting to another
automatically.
Sometimes cooking directions tell you to start on one power level and then
change to a different power level. Your oven can do this automatically.
• Suppose you want to cook roast beef for 5 minutes at 100% and then
continue to cook for 30 minutes at 50%:
1. First touch Power Level pad twice for 100% power. Then enter cooking time.
2. Touch Power Level pad. Touch number pad 5 for 50% power. Then enter
second cooking time.
3. Touch Start/Touch On pad.
Note:
1. If Power Level pad is touched twice, HIGH will be displayed.
2. If you wish to know power level, simply touch the Power Level pad. As
long as your finger is touching the Power Level pad, the power level will be
displayed.
more or leSS time aDjuStment
Should you discover that you like any of the Sensor, Sensor Cook, Defrost,
Convec Broil, Convec Roast or Convec Bake settings slightly more done,
touch the Power Level pad once after touching your choice of pads.
Should you discover that you like any of the Sensor, Sensor Cook, Defrost,
Convec Broil, Convec Roast or Convec Bake settings slightly less done,
touch the Power Level pad twice after touching your choice of pads.
aDD-a-minute
Add-A-Minute allows you to cook for a minute at 100% by simply touching the
Add-A-Minute pad. You can also extend cooking time in multiples of 1 minute
by repeatedly touching the Add-A-Minute pad during manual cooking.
• Suppose you want to heat a cup of soup for one minute.
Touch Add-A-Minute pad.
Note:
1. To use Add-A-Minute, touch pad within 1 minute after cooking, closing the
door, touching the Stop/Clear pad or during cooking.
2. Add-A-Minute cannot be used with Sensor, Sensor Cook, Defrost, Convec
Broil, Convec Roast or Convec Bake.
33
E