Operation
Opening the display monitor
OPEN
Press (OPEN) to open the display monitor,
then press (POWER) to turn on the monitor.
Tip
If your car has no ACC (accessory) position on the ignition key switch, and the POWER
SELECT switch is set to the B position, the monitor does not turn on by pressing
(POWER) on the card remote commander (page 6).
Returning the display monitor to its enclosure
Close the display monitor until it clicks. The monitor turns off automatically.
Notes
• Be careful not to catch your finger in the display monitor when closing.
• Do not put any foreign objects between the LCD panel and the enclosure when closing.
Adjusting the tilt and swivel
This display monitor can be adjusted within the
angles shown.
Tip
Before closing the display monitor, make sure that
the monitor is turned and facing the enclosure
(you will hear a click).
POWER
ATT
POWER
INPUT
MENU
VOL
MODE
+
TOP MENU ALBUM
LIST
MENU
SETUP
ENTER
DISPLAY
–
ALBUM
OFF
AUDIO
SUBTITLE
120˚
180˚
POWER
30˚
9