Leveling Legs; Storage Drawer - Maytag MES5875BAS Guide D'utilisation Et D'entretien

Maintenance

Leveling Legs

CAUTION
Be sure the anti-tip bracket secures one of the rear
leveling legs to the floor. This bracket prevents the range
from accidentally tipping.
The range should be leveled when installed. If
the range is not level, turn the leveling legs,
located at each corner of the range, until
range is level.

Storage Drawer

The storage drawer can be removed to allow you to clean
under the range.
To remove:
1. Empty drawer and pull out to the first stop position.
2. Lift up the front of the drawer.
3. Pull out to the second stop position.
ANTI-TIP BRACKET
ANTI-TIP BRACKET
4. Grasp sides and lift drawer up and out.
LEVELING LEG
LEVELING LEG
To replace:
1. Fit the ends of the drawer glides into the rails in the range.
2. Lift up the front of the drawer and gently push in to the
3. Lift drawer up again and push until drawer is closed.
24
CAUTION
Do not store plastic, paper products, food or flammable
materials in this drawer. The drawer may become too warm
for these items when the oven is in use.
first stop position.
(select models)