Hilti DAG 125-S Mode D'emploi page 27

CAUTION
Use of this guard for working on metal is not permissible.
NOTE
It is recommended that a dust removal system consisting of matched components, i.e. dust removal hood and a
suitable Hilti vacuum cleaner, are used for cutting and slitting mineral materials, such as concrete or stone. These
serve to protect the operator and increase the life of the power tool and disc used.
en
2.16 Disc guard with side cover 5
CAUTION
When grinding with straight grinding discs and cutting with cutting discs in metalworking applications, use the
guard with cover plate.
2.17 Front cover for the disc guard 6
CAUTION
When grinding with straight grinding discs and cutting with cutting discs in metalworking applications, use the
guard with front cover.
3 Consumables
Discs with a diameter of max. 125 mm, designed for a speed of 11000/min and a peripheral speed of 80 m/sec,
and with a maximum thickness of 6.4 mm (abrasive grinding discs) or 2.5 mm (abrasive cutting discs).
Discs
Abrasive cutting disc
Diamond cutting disc
Abrasive grinding disc
Diamond grinding disc
Assignment of discs to the equipment used
Item Equipment
A Guard
B Front cover (in combin-
ation with A)
C Guard with cover plate
(optional for A, B)
D DG‑EX 125/5" surface
guard
E DC‑EX 125/5"-C com-
pact guard (in combin-
ation with A)
F DC‑EX 125/5"M cut-
ting guard for mineral
materials
G DC‑EX SL cutting ad-
apter (in combination
with F)
H Side handle
I DC BG 125 hoop
handle (optional for H)
K Clamping nut
L Clamping flange
M Kwik-Lock (optional for
K)
22
Application
Cutting, slitting
Cutting, slitting
Rough grinding
Rough grinding
AC‑D AG-D
X X
-
X
-
X
- -
- -
- -
- -
X X
X X
X X
X X
X X
Designation
AC‑D
DC‑D
AG‑D, AF‑D, AN‑D
DG‑CW
AF-D AN-D
X X
- -
- -
- -
- -
- -
- -
X X
X X
X X
X X
X X
Material
metal
mineral
metal
mineral
DG‑CW DC‑D
X X
-
X
-
X
-
X
-
X
-
X
-
X
X X
X X
X X
X X
-
X