Hilti DAG 125-S Mode D'emploi page 23

ORIGINAL OPERATING INSTRUCTIONS
DCG 125‑S/ DAG 125‑S/ DAG 125‑SE angle grinder
It is essential that the operating instructions
en
are read before the power tool is operated for
the first time.
Always keep these operating instructions to-
gether with the power tool.
Ensure that the operating instructions are
with the power tool when it is given to other
persons.
Contents
1 General information
2 Description
3 Consumables
4 Technical data
5 Safety instructions
6 Before use
7 Operation
8 Care and maintenance
9 Troubleshooting
10 Disposal
11 Manufacturer's warranty - tools
12 EC declaration of conformity (original)
1 General information
1.1 Safety notices and their meaning
DANGER
Draws attention to imminent danger that will lead to
serious bodily injury or fatality.
WARNING
Draws attention to a potentially dangerous situation that
could lead to serious personal injury or fatality.
CAUTION
Draws attention to a potentially dangerous situation that
could lead to slight personal injury or damage to the
equipment or other property.
NOTE
Draws attention to an instruction or other useful informa-
tion.
18
1 These numbers refer to the corresponding illustra-
tions. The illustrations can be found on the fold-out cover
pages. Keep these pages open while studying the oper-
ating instructions.
In these operating instructions, the designation "the
power tool" always refers to the DCG 125‑S, DAG 125‑S
or DAG 125‑SE angle grinder.
Operating controls and components 1
Ventilation slots
@
On / off switch
;
Vibration-absorbing side handle
Page
=
Spindle lockbutton
18
%
Guard release button
19
&
Spindle
22
(
Guard
23
)
Clamping flange with O-ring
24
+
Abrasive cutting disc / abrasive grinding disc
28
§
Clamping nut
29
/
Kwik‑Lock quick-release clamping nut (optional)
31
:
Wrench
31
·
Speed preselection thumbwheel (DAG 125‑SE)
31
$
Non-slip grip surface
32
£
32
1.2 Explanation of the pictograms and other
information
Warning signs
General
warning
Warning: Warning: hot
electricity surface