Master TAKE CONTROL BASIC UR81 Guide Utilisateur page 10

4. Enter the code corresponding to your brand, point the
Take Control Basic Remote in the direction of your
equipment, press CHAN+ (5) once only. Continue to point
the Take Control Basic Remote at your equipment until the
equipment changes Channel (the remote control sends an
IR signal every second. Please wait until your equipment
reacts). When your equipment does react, press on the key -
/-- (11) to confirm. If you accidentally miss the code, you can
stop the autosearch by pressing CHAN- (5) and by
repeatedly pressing this key return to the right code. Press -
/-- (11) to confirm.
Remark: if some functions of your equipment don't work,
you need to try another code for your brand. The search
function starts after the last confirmed code. For example, if
it was 030, the search function starts at 031, and it will keep
on trying until the last possible code.
4.3 Automatic code search for all brands
When searching an unknown code, you can step through the
library automatically (AutoSearch). When your equipment
responds, you can stop the searching process and store the
code you found.
Note: as you can dedicate any appliance (TV, DVD, SAT...)
to VCR, CBL, DVD, CD, ASAT, DSAT or AUX keys, you
need first to enter any 3 digit code for the kind of appliance
you wish to control (found in the code book), i.e.: If you want
to program a SAT under the VCR key, enter ANY SAT code
found in the code book and then follow the steps below:
1. Turn on the device you want to control.
2. Press and hold SETUP (8) until the LED indicator (2)
lights steadily. Release SETUP button.
3. Press the mode button (3) that matches the equipment
you wish to control. The LED (2) blinks once.
4. Press CHAN+ (5) once. After a few seconds the remote
starts stepping through the code library (fast search, 1 code
per second). When the device responds, you can press
CHAN+ (5) to switch to slow search (1 code per 3 seconds).
You can step back by pressing CHAN- (5) (you can step
forward by pressing CHAN+ (5) in case you went too far
back). As soon as the device responds again, press the -/--
key (11) to store the code you found.
Remark: if some functions of your equipment don't work,
you need to try another code for your brand. The
search function starts after the last confirmed code. For
example, if it was 030, the search function starts at 031, and
it will keep on trying until the last possible code.
4.4. Manual code search
Note: as you can dedicate any appliance (TV, DVD, SAT...)
to the VCR, CBL, DVD, CD, ASAT, DSAT or AUX keys, you
first need to enter any 3 digit code for the kind of appliance
you wish to control (found in the code book), i.e.: If you want
to program a SAT under the AUX key, enter ANY SAT code
found in the code book and then follow the steps below:
1. Make sure your equipment is switched on.
2. Press and hold SETUP (8) until the LED indicator lights
steadily. Release SETUP
3. Press the mode key (3) that matches the equipment you
want to control (for example TV).
P/N 033000=XXXXX 10 Rev.01-06-06