6.2
Unpacking the device
CAUTION
Risk of injury caused by excessive physical strain.
Lifting the device, for transport, relocation and assembly, can result in injuries (e.g. back injuries).
›
Only lift the device using the openings provided.
›
The device must be transported and installed by at least 2 persons.
2
Fig. 5: Unpacking the unit
Key
1
Packaging
2
Protective packaging
↻ The device is transported to the installation location.
1 Loosen packaging tape from cardboard box.
2 Open carton at the front.
3 Remove installation material and documentation.
4 Pull up top protective packaging to remove.
5 Remove device from the packaging.
6 Place the protective packaging back into the carton.
7 Lift the device at the intended positions.
» Continue installing the mount.
6.3
Fastening the mount
CAUTION
Hazard when using unsuitable fixing materials!
If unsuitable fixing materials are used, the device could fall and persons in front of the device may be seri-
ously injured.
›
Use only fixing materials that are suitable for the mounting base. The fastening materials supplied are
only suitable for masonry and concrete.
›
Only install the device in an upright position.
KACO blueplanet 3.0 TL3 KACO blueplanet 4.0 TL3 KACO blueplanet 5.0 TL3 KACO blueplanet 6.5 TL3 KACO
blueplanet 7.5 TL3 KACO blueplanet 8.6 TL3 KACO blueplanet 9.0 TL3 KACO blueplanet 10.0 TL3
3
1
Fig. 6: Lift the unit
3
Device
4
Grip recesses
4
Page 15