Publicité
Les langues disponibles
Les langues disponibles
46
6.4
glowing embers
Tear the embers into pieces and place along the front row of ports covering all of the burner area in front of the
EN
small logs. Care should be taken to shred the embers into thin, small irregular pieces as only the exposed edges
of the fibre hairs will glow. The ember material will only glow when exposed to direct flame; however, care
should be taken to not block the burner ports.
Blocked burner ports can cause an incorrect flame pattern, carbon deposits and delayed ignition. PHAZER
glow when exposed to direct flame. Use only certified "glowing embers" and PHAZER
authorized dealer / distributor.
6.5
charcoal embers
Randomly place the charcoal embers along the front and sides of the log support tray in a realistic manner.
Fine dust found in the bottom of the bag should not be used.
NOTE: Charcoal embers are not to be placed on the burner.
6.6
logo placement
Remove the backing of the logo supplied and place on the glass viewing
door, as indicated.
W415-1541 / C / 11.23.17
logs
TM
logs available from your
TM
32.1
½"
(12.7mm)
LOGO
½"
(12.7mm)
97.1A
Publicité
