Franke FLS 905 Mode D'emploi Et Installation page 8

USE
T1
Button Function
T1 Turns the Motor off.
Turns the motor on at speed one
T2
T3 Turns the Motor on at speed two
Press and hold for 2 seconds to activate
switch-off with a 30 minute delay (Mo-
tor+Lights). It is possible to change the oper-
ating speed with this function activated.
Turns the Motor on at speed three
T4
Press and hold for 2 seconds to activate In-
tensive speed with a timer set to 10 minutes,
after which it returns to the speed that was
set previously. Suitable to deal with maxi-
mum levels of cooking fumes.
Turns the Lighting system on and off at
L
maximum intensity.
Press and hold for 2 seconds to turn the
Lighting system on and off at reduced inten-
sity.
EN
Control panel
T2 T3 T4 L
Buttons T1+T2 are lit.
Buttons T1+T3 are lit.
Buttons T1+ (T2 or T3 or
T4, respectively) flash.
Buttons T1+T4 are lit.
The Button flashes.
Button on
Button on
8 8