Télécharger Imprimer la page

Kenmore Elite 795.7313 Serie Guide D'utilisation Et D'entretien page 33

Publicité

Les langues disponibles

Les langues disponibles

Explosion
Hazard
Use non-flammable
cleaner. Failure to do so can result
in fire, explosion,
or death.
Both the refrigerator
and freezer sections defrost
automatically;
however, clean both sections about once a
month to prevent odors. Wipe up spills immediately.
INSIDE WALLS (allow
freezer to warm up so
the cloth will not stick)
To help remove odors, you can wash the inside of the
refrigerator
with a mixture of baking
soda and warm
water. Mix 2 tablespoons
of baking
soda to 1 quart of
water (26 g soda to 1 liter water.) Be sure the baking
soda
is completely
dissolved so it does not scratch the surfaces
of the refrigerator.
_CAUTION:
While cleaning
the inside, do not spray
water.
DOOR LINERS AND GASKETS
Use a clean sponge or soft cloth and a mild detergent
in warm water. Do not use cleaning
waxes, concentrated
detergents,
bleaches, or cleaners containing
petroleum
on
plastic refrigerator
parts.
GENERAL CLEANING
TiPS
*
Unplug the refrigerator
or disconnect
power.
*
Remove all removable
parts, such as shelves, crispers,
etc. Refer to the sections in Using Your Refrigerator
for
removal instructions.
*
Use a clean sponge or soft cloth and a mild detergent
in warm water. Do not use abrasive or harsh cleaners.
*
Hand wash, rinse and dry all surfaces thoroughly.
*
Plug in the refrigerator
or reconnect
power.
OUTSIDE
Waxing
external
painted
metal surfaces helps provide
rust protection.
Do not wax plastic parts. Wax painted
metal surfaces at least twice a year using appliance
wax
(or auto paste wax). Apply
wax with a clean, soft cloth.
PLASTIC PARTS (Covers and Panels)
Use a clean sponge or soft cloth and a mild detergent
in warm water. Do not use window
sprays, abrasive
cleansers, or flammable
fluids. These can scratch or
damage
the material.
CONDENSER COILS
Use a vacuum cleaner with
an attachment
to clean the
condenser cover and vents.
Do not remove the panel
covering the condenser
coil area.
For products
with
a stainless
steel exterior,
use a clean
sponge
or soft cloth
and a mild
detergent
in warm
water.
Do not use abrasive
or harsh cleaners.
Dry thoroughly
with
a soft cloth.
33

Publicité

loading