GreenWorks CSF401 Manuel De L'utilisateur page 11

EN
Examine the chain tension before each use.
9.1 EXAMINE THE CHAIN OIL
Do not use the machine without sufficient chain oil.
1. Examine the oil level of the machine from the oil
indicator.
2. Add oil if necessary.
9.2 HOLD THE MACHINE
1. Hold the chainsaw with your right hand on the rear
handle and left hand on the front handle.
2. Hold the handles with the thumbs and the fingers
around them.
3. Make sure that your left hand holds the front handle
and your thumb is below the handle.
9.3 START THE MACHINE
1. Press the on/off switch.
2. Press the lock-out button.
3. Press the trigger while you hold the lock-out button.
4. Release the lock-out button.
The chain brake must be disengaged for the chain
saw to start. Activate the brake by moving the front
hand guard forwards.
9.4 STOP THE MACHINE
1. Release the trigger to stop the machine.
9.5 OPERATE THE CHAIN BRAKE
Make sure that your hands are on the handles at all
times.
IMPORTANT
NOTE
IMPORTANT
WARNING
English
1. Start the machine.
2. Push the guard forward to to engage the chain
brake.
3. Pull the handle guard / chain brake backwards to
disengage the chain brake.
4. Call approved service center for repair before use if
• The chain brake does not stop the chain
immediately.
• The chain brake does not stay in the disengaged
position without aid.
9.6 FELL A TREE
25
Recommendation that the first-time user should, as a
minimum practice, start cutting logs on a saw-horse or
cradle.
Before you start to fell a tree, make sure that
• The minimum distance between the areas of
bucking and felling is two times the height of the
tree.
• The operation does not
• Cause injury to personnel.
• Hit utility lines. If the tree touches utility lines,
immediately tell the utility company.
• Cause losses in property.
• The user is not in the danger area (24), for example,
the downhill side of the area.
• The escape paths (25) that extend back and
diagonally behind the felling direction (23) are clear.
The felling direction is controlled by
• The natural lean of the tree.
• The location of larger branches.
• The wind direction.
• Ensure there is no dirt, stones, loose bark, nails,
and staples on the tree.
10
23
24
25
24