General Information - WIKA NS 100 Mode D'emploi

1. General information

1. General information
The pressure gauge described in the operating instructions has been
„
EN
designed and manufactured using state-of-the-art technology.
All components are subject to stringent quality and environmental
„
criteria during production. Our management systems are certified to
ISO 9001 and ISO 14001.
These operating instructions contain important information on
„
handling the instrument. Working safely requires that all safety
instructions and work instructions are observed.
Observe the relevant local accident prevention regulations and gener-
„
al safety regulations for the instrument's range of use.
The operating instructions are part of the product and must be kept
„
in the immediate vicinity of the instrument and readily accessible to
skilled personnel at any time.
Skilled personnel must have carefully read and understood the
„
operating instructions prior to beginning any work.
The manufacturer's liability is void in the case of any damage caused
„
by using the product contrary to its intended use, non-compliance
with these operating instructions, assignment of insufficiently qualified
skilled personnel or unauthorised modifications to the instrument.
The general terms and conditions contained in the sales documenta-
„
tion shall apply.
Subject to technical modifications.
„
Further information:
„
- Internet address:
4 WIKA operating instructions pressure gauge, model 2 per ATEX
www.wika.de / www.wika.com