fadini DARDO 424 Notice D'instructions page 25

DARDO 424 DARDO 424
ORDINARY MAINTENANCE
It is recommended that the operators and all the moving parts be inspected periodically (every 2-3 months or whenever
necessary) and the inner rolled screw shaft lubricated with some grease from underneath the operator.
it is also advised that the gate hinges and pivots be periodically lubricated as well.
Remove any possible obstacles and hindrances, the gates must be able to move freely in open and close directions.
GREASE
GREASE
Ceck that photocells are free
Re-align if necessary
GREASE
Gate fixing
pivot
electromechanical operator for swinging gates
from obstacles or
disturbance.
On the inner
rolled screw shaft
GREASE
GREASE
GREASE
25
Pic. 17
GREASE
Gate post
fixing pivot
Pic. 18