AKG GB 40 guitar bug Mode D'emploi page 19

2. Press down on the clip (1) and pull
the clip (1) away from the transmitter
(2) in the direction of the arrow.
3. Nest the hook (3) on the black
replacement clip into the matching
opening (4) in the transmitter (2).
4. Press the bent end of the replace-
ment clip against the transmitter (2)
to make it snap into place.
4.7 Troubleshooting
For troubleshooting hints, refer to your
receiver manual.
5 Cleaning
To clean the transmitter case,
use a soft cloth moistened with
water.
6 Specifications
Carrier frequency range
Modulation
Audio bandwidth
Frequency stability (-10°C to +50°C)
Rated deviation
T.H.D. at 1 kHz
Compander
Signal/noise ratio
RF output
Current consumption
Power requirement
Battery life
Audio input level for rated deviation
Size (WxDxH)
Net weight
This product complies with the following standards: EN60065:1998, EN301 489-9
v.1.1.1(09-2000), and EN300 422-2 v.1.1.1(07-2000).
710 to 865 MHz
FM
40 to 20,000 Hz
±15 kHz
15 kHz (SP1, SP2: 13.5 kHz)
typ. 0.8%
integrated
typ. 103 dB(A)
typ. 5 mW
typ. 75 mA
single 1.5-V AAA size battery
>10 hours (dry battery)
>5 hours (rechargeable battery)
300 mV/1 kHz
20 x 25 x 145 mm (0.8 x 1 x 5.7 in.)
36 g (1.3 oz.)
17