SEVERIN BA-3234 Mode D'emploi page 9

GB
Steam travel-iron
Dear Customer,
Before using the appliance, please read the
following instructions carefully and keep this
manual for future reference. The appliance
must only be used by persons familiar with
these instructions.
Connection to the mains supply
The appliance should only be connected to
an earthed socket installed in accordance
with the regulations.
Dual voltage selector:
With this selector, the iron can be set to
different supply voltages. Make sure that the
supply voltage corresponds with the voltage
marked on the rating label.
This product complies with all binding CE
labelling directives.
Familiarisation
1. Power cord
2. Handle with water reservoir
3. Base stand with handle release
4. Dual voltage selector
5. Rating label
6. Soleplate
7. Steam selector
8. Temperature control knob
9. Indicator lamp
10. Water level indication
11. Steam jet button
12. Water fi ll hole
13. Filling cup (no picture)
Important safety instructions
∙ Do not leave the steam iron
unattended while connected. Always
remove the plug from the wall socket,
even if you leave the room only for a
short while.
∙ Do not use the iron if it has been
dropped onto a hard surface, or
if it shows any sign of damage or
leakage.
∙ The iron must be used and stored on
a stable and durable surface only.
∙ Even with the iron placed on its back
rest, ensure that this too is on a
stable and durable surface.
∙ In order to avoid hazards, repairs
to this electrical appliance or its
power cord must be carried out by
our customer service. If repairs are
needed, please send the appliance
to our customer service department
(see appendix).
∙ Before cleaning the appliance,
ensure it is disconnected from the
power supply and has cooled down
completely.
∙ To avoid the risk of electric shock, do
not clean the appliance with water
and do not immerse it in water.
∙ Before refi lling or emptying the water
reservoir, remove the plug from the
9