Publicité
Les langues disponibles
Les langues disponibles
5. When you clean or replace the grease filters or the carbon filters also clean all
visible components on the bottom of the appliance with a mild, non- acrid and
fat-dissolving detergent.
6. Do not damage the grid of metal-made grease filters. The colour of the metal
surface may change due to frequent cleaning as well as the use of aggressive
detergents.
7. Such changes do not influence the capacity of the appliance and are no reason
for complaint.
8. Do not use a steam cleaner. RISK OF ELECTRIC SHOCK!
9. Do not use any abrasive detergents.
4.1 Grease filter
Clean the aluminium filters once a month by hand or in a dishwasher (30
use any acrid or corrosive detergents. Do not use any abrasive detergents! Do not
use any alkaline dishwasher-detergents! (ph more than 7). Do not put the filter in
the dishwasher together with tableware Filters which are blocked with food debris
do not carry a guarantee. Dry the filters properly before you reinstall them.
4.2 Replacing of the illuminant
Do not touch the illuminant with your hands. The sweat on your fingers will
reduce the operating time of your new illuminant. Use a thin cloth or a thin
glove.
WARNING! Disconnect the appliance from the energy supply.
1.
2. The illuminant should have cooled down before you remove it.
3. Remove the old illuminant.
4. Replace it by a new one of the same kind and power.
--- m = 0,45 m
Aluminium filter
Required minimum distance to surfaces such as pot lids, oven
cloths etc. to avoid any hot parts and risk of fire.
Only use self shielded illuminants to avoid hot parts, risk of fire
and exposure to UV-radiation.
28
). Do not
0
Publicité
