Publicité
Les langues disponibles
Les langues disponibles
5. Tighten the screws of the support openings (A/B), but leave free space of 10
mm between the screw head and the wall. Hang the hood on the screws.
6. Tighten the screws of the support openings (A/B) completely.
7. Screw the anchor screws (C/D) through the relevant openings completely into
the wall.
b) Chimney
1. Install the flat bar on the bottom chimney first, then on the wall. You can carry
out this step provisionally to mark the drillings of the wall mounting and drill
the relevant holes.
Chimney
2. Place the top and bottom chimney on the hood and fix the bottom one on it
(look at the drawing connect chimney to hood).
3. Fix the chimney-installation bracket below the ceiling on the wall using the
screws and dowels.
Screw chimney ↔
bracket
Wall
25
Chimney
Screw
chimney
bracket
↔
Publicité
