Publicité
Les langues disponibles
Les langues disponibles
Door Reversibility
TooI required: Philips screwdriver, Flat bladed screwdriver, Hexagonal spanner.
• Ensure the unit is unplugged and empty.
• To take the door off, it is necessary to tilt the unit backwards. You should rest the
unit on something solid so that it will not slip during the door reversing process.
• All parts removed must be saved to do the reinstallation of the door.
• Do not lay the unit flat as this may damage the coolant system.
•
It' s better that 2 people handle the unit during assembly
1. Remove two screws at rear side of top cover.
unscrew
2. Remove top cover and place it aside.
3. Unscrew top hinge and then remove door and place it on a soft pad to avoid scratch.
4. Unscrew bottom hinge of freezer door. Then remove the door and place it on a soft pad
to avoid scratch.
5. Move door holder from left side to right side.
.
Publicité
