Waeco AirCon Service Center ASC5000RPA Notice D'utilisation page 80

Initial start-up
I
NOTE
Ignore any error codes which occur during commissioning (see
page 126) and skip by pressing ENTER.
7.3 Standby menu
The standby menu shows you the current supply quantities and the time
settings of the AirConServiceCenter.
The following information is shown:
 Refrigerant quantity
 Fresh oil quantity
 UV additive quantity
 Time
 Date
7.4 Language selection
1. Press the cursor keys  or  to access the basic menu.
2. In the basic menu, use the cursor keys  or  to select "Other
selections":
3. Press ENTER to confirm.
4. Use the cursor key  to select "Service".
5. Press ENTER to confirm.
6. Enter the password "5264".
7. Use the cursor keys  or  to select the preferred language.
8. Press ENTER to confirm.
9. Press STOP. The language chosen is active and the standby menu
is displayed.
80
Short selection
Free selection
Other selections
ENTER-OK
ASC5000RPA/ASC5500RPA
EN